Epping, Eastwood, Denistone & Ryde
Tap repairs · Epping, Ryde, Eastwood & nearby
Dripping tap? Fixed properly, at a published price.
Kitchen, bathroom, laundry, shower and garden taps repaired or replaced by a licensed plumber with 20+ years in the trade. A full service on wall taps comes with a 7-year warranty on the parts.
- ★★★★★ Perfect 5.0 from 211 Google reviews
- NSW Licence 369979C
- 20+ years in the trade
- Answering 24/7
Repair or replace?
Tap problems we fix
- Dripping spouts on kitchen, basin, laundry and bath taps
- Leaks around the handle or spindle
- Stiff, loose or noisy taps, and worn mixer cartridges
- Shower and bath taps leaking inside the wall
- Bulging, rusty or burst braided hoses under sinks
- Isolation valves that won’t turn off
When a new tap is better value
- The tap body is corroded or parts are no longer made.
- It’s been leaking inside the wall for a while.
- The tap body is sound? Then a washer, cartridge or O-ring is usually all it needs, and we carry the common parts in the van.
Which tap do you have?
Knowing your tap type tells us what’s likely wrong before we arrive.
Two handles, several turns
A compression tap. A drip usually means a worn washer or seat, which is a quick repair.
Two handles, a quarter turn
A ceramic disc tap. Drips come from a worn or cracked cartridge, which we replace.
One lever for hot and cold
A mixer. Drips, stiffness or temperature problems usually mean a new cartridge.
Not sure? Text a photo of the tap to 0451 001 503 and we’ll tell you what you’ve got.
How we fix a tap
- Find the causeWe check the tap type, the washer or cartridge, the seat and the hoses.
- Price firstYou get the price before any work starts.
- Repair or replaceMost washer and cartridge repairs are done in one visit with parts from the van.
- Check the restWe check the isolation valves and braided hoses while we’re there.
- Clean upWe clean up after ourselves and show you what we did.
Tap repair prices
All prices include labour, materials, tools and GST.
| Job | Price incl. GST |
|---|---|
| Tap service, wall-mounted hot and cold (new washers, reseat, O-rings, lubricate spindles), 7-year parts warranty | $195 first pair, $110 each extra pair |
| Tap replacement, supply and install wall taps, 5 years on product | $250 first pair, $180 each extra pair |
| Kitchen mixer, Kore or similar (part only), 10-year parts warranty | $120 |
| Isolation tap replacement, 5-year parts warranty | $15 per tap |
| Flexi hoses, 15-year parts warranty | $15 per hose |
A business-hours call-out applies to each visit: $99 in our listed service areas, $125 elsewhere, including the first 15 minutes on site. See our full plumbing price list.
Taps in rental properties
Under NSW water-efficiency rules, a landlord can only charge tenants for water usage if there are no leaking taps at the start of the tenancy and taps and shower heads meet the flow limits. We fix leaks, fit compliant aerators and shower heads, and send photos and a written report. See how we work with property managers.
What local customers say
From our 211 five-star Google reviews. Read them all on Google.
★★★★★
“He replaced my tap and repaired the toilet cistern, and he also helped me with the main isolation valve for the unit. The work was completed efficiently and everything was explained clearly.”
Google reviewer, Eastwood and Epping area · Google review
★★★★★
“Alex helped out with replacing some sink baskets in Ryde as well as unblocking the drain. He was fantastic to deal with, honest and priced extremely fairly.”
Jeremy L., Ryde · Google review
★★★★★
“I live in West Ryde – and Alex from GT Plumbing is my very best recommendation. I trust him always to do an excellent job, to clean up after himself, to never over charge or overcomplicate things unnecessarily.”
Robyn P., West Ryde · Google review
Quick checks before you call
- Find the isolation valve. Most kitchen and basin taps have small valves under the sink. Turn them clockwise to stop the water to that tap.
- Know where your main tap is. It’s usually near the water meter at the front of the property. What to do if it won’t turn off.
- Don’t force the handle. Over-tightening crushes the washer and damages the seat, which makes the repair bigger.
- Check the hoses. If a braided hose under the sink is bulging, rusty or wet, turn off its valve and call us. They can burst without warning.
Check us out before you call
Everything below can be checked independently.
- Licensed: NSW contractor licence 369979C for plumbing, gas and drainage. Check it on the NSW Government licence check.
- Insured: $5 million public and products liability with GIO, certificate sent on request. See our licence and insurance details.
- Registered business: GT Plumbing Gas and Drainage Pty Ltd, ABN 37 623 531 457.
- Founder: Alex Taskun, more than 20 years in the trade.
- Reviews: perfect 5.0 from 211 Google reviews.
- Based in Epping NSW 2121, covering Epping, Ryde, Eastwood, Carlingford, Beecroft, Pennant Hills, Gladesville, Hunters Hill, Lane Cove and the North Shore, 24/7.
Tap repair questions
How much does it cost to fix a leaking tap?
A full service on a pair of wall taps is $195, including new washers, O-rings and reseating, and the parts carry a 7-year warranty. Each extra pair is $110. A business-hours call-out of $99 in our listed service areas ($125 elsewhere) applies. Prices include GST.
Why does my tap still drip when I turn it off hard?
The washer or cartridge inside is worn, so it can’t seal. Turning it harder only crushes the washer and damages the seat. A new washer or cartridge usually fixes it.
Should I repair or replace my tap?
If the tap body is in good condition, repairing it is usually cheaper. If it’s corroded, the parts aren’t available, or it’s leaking inside the wall, a new tap is often better value. We’ll give you both options honestly.
Can you fix a shower tap that leaks inside the wall?
Yes. Signs include damp walls, lifting tiles or a musty smell. We find the source, repair or replace the tap body and tell you if any wall or tile work is needed.
Can I supply my own tap?
Yes, we can fit a tap you’ve bought, as long as it’s WaterMark certified for use in Australia. We can also supply quality brands with a proper warranty.
Who pays for a dripping tap in a rental?
Usually the landlord, unless the tenant caused the damage. Tenants should report it to their agent in writing, and agents can send the work order straight to us.
Dripping tap? Talk to Alex.
Call or text a photo to 0451 001 503. You’ll get the price before we start.
Also see toilet repairs, leak detection, why your tap keeps dripping and our price list.