Pressure Limiting Valve (PLV) Installation
Water pressure · Houses · Epping, North Epping, Beecroft, Cheltenham & Pennant Hills
Is your water pressure too high? We test and fix it at the meter.
High water pressure damages taps, hot water systems and appliances, and costs you money in dripping taps and shorter part life. A pressure limiting valve at the meter brings it into the safe range set by the Australian Plumbing Code. Published prices, licensed plumber, same-day where possible.
- Perfect 5.0 from 200+ Google reviews
- NSW Licence 369979C
- 20+ years in plumbing
Why does my house need a pressure limiting valve?
The Plumbing Code of Australia (performance requirements B1P5 and B2P9) says the static water pressure at any tap inside a building must not exceed 500 kPa. Sydney mains pressure regularly exceeds this. A PLV at the meter brings it into the safe range.
Water hammer and noisy pipes
High pressure causes pipes to bang when taps shut off. Over time it loosens joints and stresses fittings.
Shorter life for everything
Taps, valves, dishwashers, washing machines and hot water systems all wear out faster under excessive pressure. Dripping taps are often the first sign.
Higher water bills
A dripping tap at high pressure wastes more water than you think. Fixing the pressure fixes the drip at the source.
Whose responsibility is the PLV — mine or Sydney Water’s?
Yours. Sydney Water owns and maintains the water main and the meter. Everything from the meter into your house is the property owner’s responsibility, including the PLV. This applies to houses — strata and unit blocks have their own rules.
The Plumbing Code requirement applies when new plumbing work is carried out. We don’t tell owners their existing house is non-compliant — but if you’re having plumbing work done and the pressure tests over 500 kPa, a PLV is part of doing the job to code.
The two valves we install — and why we chose them
AVG Pressure Reducing Valve — $480
Australian Valve Group. WaterMark certified to AS 1357.2. A reliable, Australian-made valve for standard residential installs where the street pressure is within normal range.
Caleffi 533550H AUS 3-Way Adjustable — $580
Italian-engineered, WaterMark certified (product 43983). DN 20, adjustable 100–600 kPa, factory set 500 kPa. Handles up to 2000 kPa inlet pressure. Dezincification-resistant brass body, stainless strainer, removable cartridge for servicing. The 3-way design lets us route the outlet straight or at an angle to suit your meter layout.
Both valves are WaterMark certified and comply with AS 1357.2. We don’t fit uncertified or grey-market valves. The Caleffi is the valve we recommend when street pressure is high or the meter layout needs a 3-way option.
How much does a PLV cost to install in Epping?
Prices include GST, the valve, the call-out and a standard install at the water meter. We test before and after with a calibrated gauge.
| Valve | Price incl. GST |
|---|---|
| AVG pressure reducing valve, standard install at the meter | $480 |
| Caleffi 533550H AUS 3-way adjustable, standard install at the meter | $580 |
A standard install is a straight swap or new fit at the meter with normal access. If the job needs anything beyond that — deeper excavation, moving other fittings, or non-standard pipework — you get the price before we start.
This is a standalone PLV install at the meter. The $110 PLV component included in some hot water installations is a separate item on those jobs — see hot water prices.
The Australian Standard: AS/NZS 3500 and the Plumbing Code
The Plumbing Code of Australia (NCC Volume Three) performance requirements B1P5 (cold water) and B2P9 (heated water) cap the static pressure at any tap inside a building at 500 kPa, except fire service outlets. AS/NZS 3500.1 (Water Services) sets out how to meet it. This applies in NSW under the Plumbing and Drainage Act 2011.
- Maximum: 500 kPa static pressure at any outlet inside the building (no water flowing).
- Minimum: 50 kPa at the worst-placed outlet, so fixtures still work properly.
- Hot water too: AS/NZS 3500.4:2021 clause 5.9.2 requires installers to test inlet pressure and fit a PLV when required.
- Applies to new plumbing work, not an audit of your existing house.
- Paperwork: a PLV install is plumbing work — it needs a Notice of Work before and a Certificate of Compliance after.
We don’t reproduce the full Standard here (it’s copyrighted). The references above come from regulator guidance published by the VBA, the ABCB and the NSW Government. If you want to read the Standard itself, it’s available from Standards Australia.
How we install a PLV
- Test the street pressureCalibrated gauge on the meter outlet, no water running. If it’s under 500 kPa, you don’t need a valve and we tell you so.
- Price firstYou get the price before any work starts. Standard install or not, nothing is a surprise.
- Install the valveAt the meter, after the stop cock, with the flow arrow pointing towards the house. Isolating valves either side so the valve can be serviced later.
- Test afterGauge on a tap inside the house confirms the pressure is now within range.
- PaperworkNotice of Work and Certificate of Compliance lodged as required.
Check us out before you call
Everything below can be checked independently.
- Licensed: NSW contractor licence 369979C for plumbing, gas and drainage. Check it on the NSW Government licence check.
- Insured: $5 million public and products liability with GIO, certificate sent on request. See our licence and insurance details.
- Registered business: GT Plumbing Gas and Drainage Pty Ltd, ABN 37 623 531 457.
- Founder: Alex Taskun, more than 20 years in the trade.
- Owner-operated: you ring Alex’s own mobile, 0451 001 503. No call centre and no 1300 number.
- Prices published: every rate is on our price list before you call, and you get the price before any work starts.
- Reviews: perfect 5.0 from 200+ Google reviews.
- Based in Epping NSW 2121, covering North Epping, Beecroft, Cheltenham and Pennant Hills, 24/7.
Common questions about PLVs
What is a pressure limiting valve?
A pressure limiting valve (PLV) reduces the water pressure coming into your house from the street main to a safe level. It is installed at or near the water meter, before the water reaches your taps, hot water system and appliances.
Why does my house need a PLV?
The Plumbing Code of Australia (performance requirements B1P5 and B2P9) says the static water pressure at any tap inside a building must not exceed 500 kPa. Sydney mains pressure can exceed this. High pressure causes water hammer, noisy pipes, shorter life for taps, valves and hot water systems, and higher water bills from dripping taps.
Whose responsibility is the PLV — mine or Sydney Water's?
Yours. Sydney Water owns and maintains the water main and the meter. Everything from the meter into your house is the property owner's responsibility, including the PLV. This applies to houses — strata and unit blocks have their own rules.
How much does a PLV cost to install in Epping?
$480 for an AVG valve or $580 for a Caleffi 3-way adjustable, including call-out, GST and a standard install at the meter. If the job needs anything beyond a standard install, you get the price before we start.
How do I know if my water pressure is too high?
We test it with a calibrated gauge on the meter outlet or the nearest garden tap, with no water running. If it reads over 500 kPa, a PLV brings it into range. The test is included in the install.
Water hammer or dripping taps? It could be your pressure.
We test it at the meter and give you a straight answer. If it’s fine, we tell you and you pay the call-out only.
Also see our plumbing prices, plumber Epping and hot water systems.